Toshiba ZL2* Series User Manual page 98

Digital series lcd tv
Table of Contents

Advertisement

PROBLEM SOLVING
Q
Why don't the networked devices work?
A
The LAN cables are not connected properly or at all.
Connect all cables (see page 14).
Check the settings under the Network Setup menu
(see page 47).
Q
Why doesn't the Media Player feature operate?
A
Make sure that devices are connected correctly.
Incorrect behaviour may occur with a USB Hub
connection.
Check your network setup if using DLNA CERTIFIED™
Server.
Q
Why are not 3D images displayed?
A
Press 3D on the remote control and select 3D.
Check 3D Auto Start in 3D Setup menu (see
page 32).
Q
Why doesn't the USB HDD work?
A
Register your USB HDD.
Use the USB 2 port to connect the USB HDD.
Your country/area may not support the USB HDD
function.
Q
What do the LEDs on the front of the television
indicate?
A
Check the table below.
LED indication
Condition
LED-1
LED-2
Green
Orange
Power ON
Programme Timer is set
Both Programme Timer
(Recording) and Recording are
NOT working
Green
Red
Power ON
Programme Timer (Recording)
or Recording is working
Green
OFF
Power ON
Programme Timer is NOT set
Both Programme Timer
(Recording) and Recording are
NOT working
Red
Orange
Power OFF (Standby)
Programme Timer is set
Both Programme Timer
(Recording) and Recording are
NOT working
Red
Red
Power OFF (Standby)
Programme Timer (Recording)
or Recording is working
Other problems
If your TV's problem is not addressed in this Questions and
Answers section or the recommended solution has not
worked, do one of the following:
1
Turn off your TV. After 30 seconds, turn it on.
2
Turn off the TV and unplug the power cord. After
1 minute, plug the power cord in and turn on the TV.
3
Perform the Reset Factory Defaults procedure (see
page 85).
LED indication
Solution
LED-1
Red
OFF
(Blinks)
Red
(Blinks)
Green
(Blinks)
Orange
Red
Green
98
LED 2 LED 1
Condition
LED-2
OFF
Power OFF (Standby)
Programme Timer is NOT set
Both Programme Timer
(Recording) and Recording are
NOT working
Green
Abnormal operation of BUS
line.
OFF
Abnormal operation of WDT.
OFF
Fan stopped.
(if applicable)
Green
For Service
SW Upgrade in Progress
OFF
For Service
SW Upgrade Failed
OFF
For Service
SW Upgrade Successful
Solution
Turn OFF the TV
and unplug the
power cord. Plug
the power cord in
again and turn ON
the TV.

Advertisement

Table of Contents
loading

Table of Contents