Hi-Fi Stereo Sound System - Toshiba D-VR18DTKB Owner's Manual

E9NG1BD_EN.book Page 88 Monday, April 7, 2008 5:54 PM

Hi-Fi Stereo Sound System

This unit will record and playback Hi-Fi stereo sound.
In addition, it has a NICAM stereo sound decoder.
This unit will receive stereo and bilingual broadcasts
and it is possible to record in several ways and to play
back the sound.
Selecting the Sound Mode
You can select each mode by pressing [AUDIO
on the remote control. Each mode is indicated on the
TV screen as follow.
• During playback of the recorded tape in Hi-Fi mode
Mode Audio output
Stereo Stereo
L L audio from both speakers
R R audio from both speakers
Normal Monaural
• During reception of bilingual broadcasts
Mode Audio output
Main audio from the both
Main
speakers
Sub audio from the both
Sub
speakers
• Main audio from the left
Main / speaker
Sub • Sub audio from the right
speaker
Note
• If you play back non-Hi-Fi tapes, the unit will play
back automatically in monaural regardless of the
mode you set.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
88
EN
]
Display on
the TV screen
STEREO
LEFT
RIGHT
MONO
Display on
the TV screen
Main
Sub
Main
Sub