Settings For External Equipment - Toshiba D-VR18DTKB Owner's Manual

E9NG1BD_EN.book Page 47 Monday, April 7, 2008 5:54 PM
Example 3
Timer
Recording
Satellite Link
Actual
Recording

Settings for External Equipment

Video Colour System
When you record from external equipment or copy a
videotape to a DVD disc, you can set the format Auto,
PAL or SECAM.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER / OK].
2
Select "Recording" using [U / D],
then press [ENTER / OK].
3
Select "Video Colour System" using
[U / D], then press [ENTER / OK].
4
Select "Auto", "PAL" or "SECAM"
using [U / D], then press
[ENTER / OK].
General Setting
Playback
Display Auto Chapter
Video Recording Audio Select (XP)
Recording Auto Finalise
Video Colour System
Clock Aspect Ratio (Video Mode)
Auto
Channel Make Recording Compatible
PAL
DivX Bilingual Recording Audio
SECAM
HDMI External Input Audio
Reset All
Video Colour System
Auto: The video colour system will be set
automatically according to the recording
material.
PAL: The video colour system will be set to
PAL.
SECAM:The video colour system will be set
SECAM.
5
Press [SETUP] to exit.
Note
• During recording, when a signal other than PAL or
SECAM is detected, an error message appears on
the screen and recording will be paused. Recording
will be resumed when a PAL or SECAM signal is
detected.
Recording from External Equipment
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R
VCR VCR VCR
DVD+R D D VD+R VD+R
Before recording from external equipment, see pages
21 to 22 for connection instructions.
1
Turn the TV and the unit on, and
select the input of the TV to which
the unit is connected.
DVD+RW D D VD+R VD+RW W
47
EN