SMART FORTWO CABRIO Operating Instructions Manual page 93

Mirror for the driver sun visor*
Accident risk!
Keep the mirrors in the sun vi
sors covered while driving. Dazzling
light could otherwise endanger your
self and others.
Fitting the mirror
The mirror for the driver sun visor is
glued into place.
Clean the area of the driver sun visor
to which it is to be affixed (A) with or
dinary washing up liquid or glass
cleaner.
>Note!
Do not use alcohol or acetone. This could
cause damage to the surface of the driver
sun visor.
Do not touch the mounting area with the
fingers, as this could impair the adhe
sive bond.
Sun visors
Dry the prepared area with a clean
paper towel.
Remove the protective film from the
two adhesive sections on the back of
the mirror.
Insert the mirror for the driver sun vi
sor into the fitting aperture (B) on the
sun visor and secure with the locating
pin.
Open the mirror cover.
Press both adhesive sections (A) on the
back of the mirror firmly against the
sun visor for about 20 seconds.
>Note!
The adhesive will take approx. 3 hours to
harden completely.
Weather outlook 91