SMART FORTWO CABRIO Operating Instructions Manual page 241

Remove the stopper from the filler hose
and push the end of the hose onto the
tyre valve.
Hold the bottle with the filler hose
pointing downwards and squeeze it.
Press the entire contents of the bottle
into the tyre.
Pull the hose off the valve and remove
any residual sealant from the valve, rim
and/or tyre.
Screw the original valve insert (or the
replacement one if necessary) back into
the valve with the valve remover.
Breakdown set*
Fit the compressor's air hose accurate
ly onto the valve.
Plug the power connection into the 12
volt power socket.
Inflate the tyre to at least 1.8 bar (max
imum 2.5 bar).
>Note!
Do not run the electric compressor for
more than six minutes. If you do so, there
is a risk of overheating!
Communications breakdown 239