File System; Phone Identity; Auto Off; Time Zones - Siemens MC60 Operating Instructions Manual

Enter the phone number
to which the caller will be
J
diverted (if not already
entered).
Confirm. After a short
§OK§
pause, the setting is
confirmed by the
network.
All calls
All calls are diverted.
Symbol in the top line of
n
the display in standby
mode.
Other possibilities for divert:
Not reachable, No
fax, Receiving data
Status check
You can check the current divert
status for all conditions.
After a short pause, the current
situation is transmitted by the
network and displayed.
Condition set.
p
Not set.
o
Display if status is
s
unknown (e.g. with a new
SIM card).
Clear all
All set diverts are cleared.
reply, Busy, Receiving
Fact. settings
Reset phone to default values
(factory setting).

File system

Format the file system (p. 51)
(Format)
or defragment all stored data
b
up).

Phone identity

Display the phone identity number
(IMEI) and software version.

Auto off

The phone switches off each day at
the set time.
Clock
§Menu§
Time/date
The clock must be set to the right
time once at start-up.
§Change§
Additional information
b
If the battery is removed for longer than
30 seconds, the clock must be reset.

Time zones

Set the time zone for where you
currently are .
Setup
and delete (not Phonebook)
¢ m ¢
Clock
¢
Select function.
First enter the date, then
the time.
41
(Clean