• In order to minimise any security risks,
connections should be made only with
trustworthy equipment, in general.
• Where possible, you should limit the "visi-
bility" of your phone. You can make it
much more difficult for unknown equip-
ment to try to establish a connection with
your phone. To do this, in the Bluetooth
menu set the option
• In a Bluetooth connection, your phone's
name is transmitted. In the delivery state
this is the "Bluetooth ID". When switching
Bluetooth on for the first time, or later in the
Bluetooth menu, you can change this
Name, p. 102).
• If Bluetooth is not needed, this function
should be switched off.
Before using Bluetooth accessories or mo-
bile phones within a vehicle, check the vehi-
cle instruction manual for any restrictions on
using such products.
The Wireless Clip-on Headset HS-3W is
compliant with and adopts the Bluetooth
Specification 1.1. However, interoperability
between the Wireless Clip-on Headset
HS-3W and other Bluetooth-enabled prod-
ucts is not guaranteed because it depends
on compatibility. For more information on
the compatibility between the Wireless
Clip-on Headset HS-3W with other
Bluetooth-enabled products, please check
with your dealer.
to the value
Read this information before using
your wireless handheld phone.
As this mobile phone is equipped
with a fixed (non-retractable) an-
tenna, some paragraphs in the text
below may not be applicable.
Use only the supplied or an approved
replacement antenna. Unauthorized
antennas, modifications, or attach-
ments could damage the phone and
may violate FCC regulations.
Hold the phone as you would any
other telephone with the antenna
pointed up and over your shoulder.
Tips on efficient operation
For your phone to operate most
• Extend your antenna fully
• Do not touch the antenna unnec-
essarily when the phone is in use.
Contact with the antenna affects
call quality and may cause the
phone to operate at a higher pow-
er level than otherwise needed.