Download  Print this page


Text message can-
not be sent.
EMS pictures are not
displayed on the
destination phone.
No Internet access
PIN error/
PIN2 error.
Phone code error.
Service provider
code error.
Too few/too many
menu entries
No fax possible.
Charge meter does
not work
Severe shock
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat.
Reset settings to the factory default, p. 98:
Possible causes
Service provider does not sup-
port this service.
Phone number for service
centre not set or incorrectly set.
SIM card contract does not sup-
port this service.
Service centre overloaded.
Recipient does not have a com-
patible phone.
Destination phone does not sup-
port the EMS standard.
Incorrect browser profile set, or
wrong or incomplete settings.
Three wrong entries.
Three wrong entries.
No authorisation for this service. Contact your service provider.
Functions may have been add-
ed or deleted by the service pro-
vider via the SIM card.
Wrong settings in the PC.
No authorisation for this service. Contact your service provider.
Charge pulse is not being
Remove battery and SIM and re-insert them. Do not dismantle the phone!
Dry connector contacts thoroughly. Stand mobile upright in an air current. Do not dis-
mantle the phone!
Questions & Answers
Possible solution
Contact your service provider.
Set service centre (p. 54).
Contact your service provider.
Repeat message.
Check browser settings (p. 75); contact your ser-
vice provider.
Enter the PUK (MASTER PIN) supplied with the
SIM card according to the instructions. If the PUK
(MASTER PIN) has been lost, contact your service
Contact Siemens Service (p. 116).
Check with your service provider.
Check settings (p. 104).
Contact your service provider.
# 9 9 9 9 #


Table of Contents

   Also See for SIEMENS S66

   Related Manuals for SIEMENS S66

Comments to this Manuals

Symbols: 0
Latest comments: