Design Specifications; Models - Thermador KBULT3651A Installation Instructions Manual

Curved Handle Series
Features stainless steel exterior styling complemented by curved
door handles.
KBULT3651A KBURT3651A
Custom Panel Series
Features factory-installed, traditional style trim to provide a
"framed" look. This series requires the installation of custom
panels that are not included.
KBULT3671A KBURT3671A
4

DESIGN SPECIFICATIONS

M od e l s
Professional Handle Series
Features stainless steel exterior styling with professional-look door
handles.
KBULT3661A KBURT3661A
TRIMKITBM - Trimless Trim Kit
On the Custom Panel Series, you can create a "frameless" look
using full-overlay custom panels. You will need to order a Trimless
Trim Kit for 36 in. Bottom Mounts TRIMKITBM. This accessory kit
contains parts to replace the factory trim.
Full-overlay custom panels and handles are required but not
included in the accessory kit. Create the panels according to the
specifications in the "Full-Overlay Custom Panels" section. You can
order a set of Thermador's Curved Handles or select handles from
other sources. For door clearances, see "Handle and Door
Clearances for Custom Panel Series."
CURVEDHAND - Curved Handle Kit
For use with full-overlay custom panels, you can order Thermador's
Curved Handle Kit. The kit contains 2 handles, screws, and
installation instructions.
EXTHANDBM - Extended Handle Kit for 36 in. Bottom-mount
This kit may be required if you insatll a custom raised panel. See
"Handle and Door Clearances for Custom Panel Series."