TP-Link TD-8811 User Manual page 60

Enable Automatic Assigned Default Gateway - Select this checkbox, and then the
Router will accept the first received default gateway assignment from one of the PPPoA,
PPPoE or MER/DHCP enabled PVC(s). If this checkbox is not selected, you have to enter
the static default gateway and/or an interface. Click Save/Apply to save your
configurations.
Note:
If changing the Enable Automatic Assigned Default Gateway from unselected to selected,
you must reboot the Router to get the automatic assigned default gateway.
4.3.5.2 Static Route
Choose "Routing→Static Route" menu, you can view and add the Static Route entry in the
next screen as shown in Figure 4-33. A static route is a pre-determined path that network
information must travel to reach a specific host or network.
TD-8811 ADSL2+ Modem Router User Guide
Figure 4-32
55