Security - TP-Link TD-8811 User Manual

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely
needed here.
WAN MAC Address - This field displays the current MAC address of the WAN port. If
your ISP requires you to register the MAC address, please enter the correct MAC address
into this field in XX:XX:XX:XX:XX:XX format (X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the PC that is
managing the Router. If the MAC address is required, you can click the Clone MAC
Address button and this MAC address will be filled in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click the Save/Reboot button to save your settings.
Note:
1. Only the PC on your LAN can use the MAC Address Clone function.
2. Your configuration won't take effect unless the ADSL Router is rebooted.
3. MAC Clone can't be used with port mirror. If they are set both, the Router will be down.

4.3.4 Security

Choose "Advanced Setup→Security" menu, you can do some security configurations for your
Router. There are two submenus under the Security menu as shown in Figure 4-25.
Figure 4-25
TD-8811 ADSL2+ Modem Router User Guide
Figure 4-24
50