Usb Configuration - TP-Link TD-8811 User Manual

7. Click Save/Reboot button to save the settings and reboot the router.
Note:
The function won't take effect until the router reboots.

3.6 USB Configuration

If you use the USB interface, firstly, you must install the USB driver to the computer. You can
obtain the drives from the provided CD or download from our website. (http://www.tp-link.com)
USB Drive installation procedures
If the hardware is installed before the computer is Power On. Please turn on the computer and
enter the operating system, Then the operating system will identify the device. If the hardware is
installed after the computer is Power On, the desktop will display the information about finding
the new hardware.
1) You will see the Figure 3-26 requiring install software for USB Device, select "Install from a
list or specific location (Advanced)" and click Next to continue.
TD-8811 ADSL2+ Modem Router User Guide
Figure 3-28
30