to configure it without selecting encryption method and
secret keys by manual. In the "Wireless settings" menu, click
"WPS settings" to enter the next screen.
WPS settings:To enable or disable WPS function. The
default is "disable".
WPS mode : Provide two ways: PBC (Push-Button
Configuration) and PIN code.
PBC
Select the PBC or press the WLAN/WPS button on
:
the front panel of the device for about one second (Press
the button for about one second and WPS indicator will
be blinking for 2 minutes, which means the WPS is
enabled. During the blinking time, you can enable
another device to implement the WPS/PBC negotiation
between them. Two minutes later, the WPS indicator will
be off, which means the WPS connection is completed. If
11N Wireless Broadband Router
33