When A Function Does Not Work - Panasonic KX-MB1530E Operating Instructions Manual

10.3 When a function does not work

10.3.1 General
Problem
The unit does not work.
The recording paper exit fills
up quickly or the recording
paper does not stack properly
in the recording paper exit.
I cannot adjust the volume,
display items stored in the
phonebook or display Caller
ID information (KX-MB1520/
KX-MB1530 only).
A printing error is displayed
while using PC FAX
(KX-MB1520/KX-MB1530
only) and Remote Control.
Multi-Function Station does
not work properly.
I cannot install or uninstall
Multi-Function Station.
I cannot view the operating
instructions using
Multi-Function Station.
I cannot find the unit in the
[Target Device] or [Device
Select] dialogue box when
operating the following
functions.
– Scanning
– Remote Control
– PC FAX (KX-MB1520/
KX-MB1530 only)
– Device Monitor
I forgot the password for
feature programming via
remote operation.
Cause & Solution
R Check the connections (page 11, 23).
R High humidity may cause the recording paper to curl. Try turning the paper
over and re-inserting it. If paper curl is excessive, please remove it from the
recording paper exit. If you still have this problem, please try with freshly
unpacked paper.
R The unit is set to scan mode or copy mode. Set the unit to fax mode by
pressing MFaxN repeatedly (page 17). If you still have this problem, contact
our service personnel.
R The printer driver is used for PC FAX and Remote Control. Transmission
errors will be displayed as printing errors.
R If the USB cable is connected to a USB hub, connect the cable directly to
the USB port on your computer.
R Make sure you have installed the latest Service Pack available for the
version of Windows installed on your computer. See the Microsoft web site
for details.
R Check that your computer has enough memory and hard disk space. If your
computer warns that there is insufficient memory, close other applications.
If there is not enough space on the hard disk, delete unnecessary files.
R Uninstall Multi-Function Station once, and re-install it.
R Some of the files needed to install or uninstall Multi-Function Station may
be corrupted. Use the MfsCleaner utility (found on the supplied CD-ROM)
to solve the problem.
1. Insert the supplied CD-ROM into your CD-ROM drive.
R The setup program will start automatically.
2. [Tools] A [Cleanup Tool]
R The [MfsCleaner] window will appear.
3. Click [Clean], and then click [Yes] to restart the computer.
Note:
R To install Multi-Function Station again, see page 22.
R Install the operating instructions on your computer beforehand (page 23).
R The printer driver has not been installed. Install it on your computer
(page 22).
R You may have changed the feature programming password. If you do not
remember it, assign a new password using feature #155 (page 53). When
required to enter the current password, enter "0101" instead.
10. Help
71