To Replace Discs During Playback; To Repeat Play - TECHWOOD ST64 Owner's Manual

CD Playback

To Replace discs during Playback

You can open the disc tray during playing a disc to
check what discs are to be played next and replace
discs without interrupting playback of the current disc.
1 1
Press the CD OPEN/CLOSE (OPEN/CLOSE).
The disc tray is opened. Two disc compartments
appear. Even if the unit is playing a disc, it doesn't
stop playing.
2 2
Replace discs in the compartments with new
ones.
The unit plays the disc in the left compartment
after the current disc, and then the one in the
right compartment.
3 3 Press CD OPEN/CLOSE (OPEN/CLOSE).
The CD door is closed.
Notes
• Do not place more than one compact disc on one disc
tray at the same time.
• Do no push the disc tray to close CD door, as you may
damage the unit.
OPEN/CLOSE
TAPE-A TAPE-B
TAPE-A TAPE-B
X
TAPE-A APE-A TAPE-B APE-B

To Repeat Play

To play one track repeatedly.
Press REPEAT once during playback.
- "REPEAT 1" appears in the display window.
To play one disc repeatedly.
Press REPEAT again during playback.
- "REPEAT 1 DISC" appears in the display window.
To play all tracks on all discs repeatedly
Press REPEAT once more during playback.
- "REPEAT ALL DISC"appears in the display window.
To cancel repeat play
- Press REPEAT several times until repeat indicators
disappear.
Program repeat play
• Press REPEAT once during program play.
- "REPEAT 1" appears in the display window.
(One track repeat)
• Press REPEAT again during program play.
- "REPEAT ALL DISC" appears in the display win-
dow. (All program repeat)
REPEAT
17