Listening To The Radio - TECHWOOD ST64 Owner's Manual

Listening to the radio

Preset radio stations in the units memory first (see "Presetting radio stations" on the previous page).
PRESET DOWN/UP
POWER
TUNER/
BAND
1 1 Press TUNER/BAND until AM or FM appears in
the display window.
The last received station is tuned in.
2 2 Press PRESET DOWN/UP on the front panel or
PRESET on the remote control repeatedly
to select the preset station you want.
Each time you press the button, the unit tunes in
one preset station at a time.
3 3 Adjust the volume by rotating VOLUME
DOWN/UP KNOB on the front panel or pressing
VOLUME ( ) on the remote control repeat-
edly.
To listen to non-preset radio stations
• For manual tuning, see "Tuning in manually" on the
previous page.
• For automatic tuning, see "Tuning in automatically" on
the previous page.
PRESET (
VOLUME DOWN/
UP KNOB
MODE/RIF
TAPE-A TAPE-B
TAPE-A TAPE-B
TUNER/
BAND
)
TAPE-A APE-A
To turn off the radio
Press POWER to turn the unit off or select another
function mode (CD, TAPE or AUX).
For your reference
• If an FM program is noisy
Press MODE/RIF so that "STEREO" disappears in
the display window. There will be no stereo effect,
but the reception will improve. Press MODE/RIF
again to restore the stereo effect.
• To improve reception
Reposition the supplied antennas.
Notes
• Use MODE/RIF (Radio Interference Filter) function to
switch the mono reception if stereo reception is dis-
torted by noise.
• When recording the MW(AM) or LW broadcast, beat
noises occur. If it does, press MODE/RIF once.
X
VOLUME
( )
TAPE-B APE-B
13