CD Playback
DISC 1,2,3
POWER
CD PAUSE
PLAY
(
/
)
CLEAR/SET/
STOP( )
Basic Playback
1 1
Press POWER to turn on the unit.
2 2
Press the CD button on the front panel to enter
the CD mode.
If no disc is entered in the disc drawer, the "NO
DISC" indicator is displayed.
3 3
Press CD OPEN/CLOSE (OPEN/CLOSE) and
place the disc into the disc tray.
The disc on the left (DISC 1) is played first.
DISC 1
Note
To load an 8cm(3 inch) disc, put it onto the inner circle
of the tray.
4 4
Press CD OPEN/CLOSE (OPEN/CLOSE) to
close the disc compartment.
5 5
Press PLAY(
) on the front panel or CD PLAY/
PAUSE (
) on the remote control .
16
DISC SKIP
OPEN/
CLOSE
TAPE-A
TAPE-B
/
To Pause Play
Press CD PAUSE on the front panel or CD
PLAY/PAUSE (
playback.
Press this button again it to resume play.
To Stop Play
Press STOP(
To Skipping the Track
• Press
• When
TAPE-A
With the label side up
TAPE-B
To Play Fast Rewind or Fast Forward
After pressing and holding
on the remote control during playback, then release
at the point you want.
To Go to the next discs
Press DISC SKIP on the front panel or D.SKIP on the
remote control during playing or stopping.
To Select a disc directly
Press DISC 1, DISC 2 or DISC 3 during playing or
stopping.
When you press DISC 1-3 before playing a disc, the unit
will automatically start playing the selected disc.
X
CD PLAY/
PAUSE (
)
STOP (
)
TAPE-A
APE-A
) on the remote control during
) during playback.
on the front panel or
remote control to go to the next track.
button on the front panel or
button on the remote control is pressed once mid-
way through a track, the player returns to the start
of that track. When it is pressed again, a track is
skipped each time the button is pressed.
D.SKIP
TAPE-B
APE-B
on the
/
button