Connections
Speaker System Connection
Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the
cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).
Right speaker
Notes
• Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on
the speakers.
• Do not disassemble the front cover of supplied speaker
Antenna (Aerial) Connections
Connect the supplied FM/AM antennas for listening to the radio.
• Connect the AM loop antenna to the AM antenna connector.
• Connect the FM wire antenna (or FM "T" antenna) to the FM 75Ω/300Ω coaxial connector.
Notes
• To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
8
FM external
antenna(aerial)
(not supplied)
300
coaxial cable
FM indoor
antenna(aerial)
AM
Position
it for the
best
FM
reception
R
L
Red
+
L
-
Black
-
R
+
Red
.
AM loop antenna (aerial)
(Supplied)
Left speaker