Audio Adjustment; Volume Adjustment; Sound Quality Adjustment; Mute - TECHWOOD ST64 Owner's Manual

Audio Adjustment

Volume Adjustment

• Turn VOLUME DOWN/UP knob clockwise to increase
the sound level, or counterclockwise to decrease it.
• Press VOLUME CONTROL (
sound level, or press the VOLUME CONTROL (
decrease it on the remote control.

Sound Quality Adjustment

• To activate stereo sound
- You can choose between 6 fixed sound impressions.
Select a desired sound mode by using EQUALIZER
PATTERN buttons on the front panel or EQ PATT.
button on the remote control.
- Each you press the button the indication changes as
follows.
→ ROCK →
FLAT
↑
JAZZ ← CLASSIC ← VOCAL
• Headphone Jack
Connect a stereo headphone plug ( 6.3mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).

MUTE

Press MUTE on the remote control to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display
window.

SURROUND

To activate surround mode
• You can choose between 7 fixed sound impressions.
• Select a desired surround mode by using the SURROUND
(SURR.) button on the front panel or on the remote control.
• Each you press the button the indication changes
as follows.
SURROUND OFF → SIMULA TED LOW → SIMULA TED HIGH
↑
MOVIE HIGH ← MOVIE LOW ← MUSIC HIGH ← MUSIC LOW

DISPLAY MODE

Whenever you press DISPLAY MODE (DISP.MODE) on
the front panel or on the remote control , you can enjoy
the spectrum change with 6 types in the display.

XDSS (Extreme Dynamic Sound System)

- Press XDSS to reinforce treble, bass and surround
effect.
- Each you press the button the indication changes as
follows.
XDSS OFF → XDSS 1 ON → XDSS 2 ON
UBB/HI-TONE
Press UBB/HI-TONE button to select bass or treble.
) to increase the
) to

DEMO

Press DEMO in power on/off state to demonstrate the
function in the display window.
To cancel it, press POWER or DEMO again. During
demonstration in power-on status you can cancel it
by using the other buttons.
POP

DIMMER

This function is darken the display window by half in
power-on status. Press DIMMER on the remote control
once, and the display is darken, and if you press it once
more, the display will darken by half too. To cancel it
press the button again.
- Each you press the button the indication changes as
follows.
→
UBB ON UBB OFF
↑
HITONE OFF ← HITONE ON
11