Precautions - Taxan U6-112 User Manual

Usage Notice

Precautions

Follow all warnings, precautions and maintenance as
recommended in this user's guide to maximize the life of
your unit.
Do not look into the projector's lens when the lamp is on.

The bright light may hurt your eyes.
To reduce the risk of fi re or electric shock, do not expose

this product to rain or moisture.
Please do not open or disassemble the product as this may

cause electric shock.
When changing the lamp, please allow unit to cool down,

and follow all changing instructions.
This product will detect the life of the lamp itself. Please

be sure to change the lamp when it shows warning
messages.
Reset the "Lamp Timer Reset" function from the On

Screen Display "Lamp Setting" menu after replacing the
lamp module (Refer to page 31).
When switching the projector off, please ensure the

projector completes its cooling cycle before disconnecting
power.
Turn on the projector fi rst and then the signal sources.

Do not use lens cap when projector is in operation.

When the lamp reaches the end of its life, it will burn out

and may make a loud popping sound. If this happens, the
projector will not turn back on until the lamp module has
been replaced. To replace the lamp, follow the procedures
listed under "Replacing the Lamp". (See page 36)
English English English
3 3 3