Appendices; Troubleshooting - Taxan U6-112 User Manual

English English 32 32

Appendices

Troubleshooting

If you experience trouble with the projector, refer to the
following information. If the problem persists, please
contact your local reseller or an authorized service center.
Problem: No image appears on screen
Ensure all the cables and power cables are correctly and securely

connected as described in the "Installation" section.
Ensure the pins of connectors are not crooked or broken.

Check if the projection lamp has been securely installed. Please

refer to the "Replacing the lamp" section.
Make sure you have removed the lens cap and the projector is

switched on.
Ensure that the "Picture Mute" feature is not turned on.

Problem: Left or right edge of the image is missing or the
image is unstable or noisy
Press "Auto" on the remote control or on control panel.

If you are using a PC:

For Windows 3.x:
1. In the Windows Program Manager, double click the "Windows
Setup" icon in the Main group.
2. Verify that your display resolution setting is less than or equal
to 1280 x 1024 (U6-112) or 1400 x 1050 (U6-132/U6-232).
For Windows 95, 98, 2000, XP:
1. From the "My Computer" icon, open the "Control Panel"
folder, and double click the "Display" icon.
2. Select the "Settings" tab.
3. Click on the "Advanced Properties" button.
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
4. Verify the resolution setting is less than or equal to 1280 x 1024
(U6-112) and 1400 x 1050 (U6-132/U6-232) resolution.