Usage Notice; Safety Information - Taxan U6-112 User Manual

English English 2 2

Usage Notice

Safety Information

The lightning fl ash with arrowheard within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous volt-
age" within the product's enclosure that may be of suffi cient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of import operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Read these instructions –before using this projector.
2. Keep these instructions –for future reference.
3. Follow all instructions.
4. Install in accordance with the manufacturer's instructions
A. Do not block any ventilation openings
To ensure reliable operation of the projector and to protect it from
overheating, put the projector in a position and location that will not
interfere with its proper ventilation. For example, do not place the
projector on a bed, sofa, carpet, or similar surface that may block the
ventilation openings. Do not put it in an enclosure, such as a bookcase
or a cabinet that may keep air from fl owing through its ventilation
openings.
B. Do not use this projector near water or moisture. To reduce the
risk of fi re or electric shock, do not expose the projector to rain or
moisture.
C. Do not install near any heat sources, such as radiators, heaters,
stoves or other apparatus (including amplifi ers) that produce heat.
5. Clean only with a dry cloth.
6. Only use attachments/accessories specifi ed by the manufacturer.
7. Refer all servicing to qualifi ed service personnel. Servicing is required
when the projector has been damaged in any way:
Such as power cable or plug is damaged.

Liquid has been spilled or objects have fallen into the apparatus.

The projector has been exposed to rain or moisture, does not

operate normally, or has been dropped.
Do not attempt to service this projector yourself. Opening or removing
covers may expose you to dangerous voltages or other hazards. Please
call to an authorized service center near you.
8. Do not let objects or liquids enter the projector –as they may touch
dangerous voltage points or short-out parts that could result in a fi re or
electric shock.
9. See projector enclosure for safety related markings.
10. The projector should not be adjusted or repaired by anyone except
properly qualifi ed service personnel.