Powering On/Off The Projector; Powering On The Projector - Taxan U6-112 User Manual

Turn on the projector
fi rst and then the signal
sources.
Installation

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap. 
2. Ensure that the power cable and RGB signal cable are
securely connected. The Power LED will fl ash green.
3. Turn on the lamp by pressing "Power/Standby" button on
the control panel.  And the Power LED will turn green.
The fi rst time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on the power of the connected equipment (computer,
notebook, video player, etc.). The projector will detect your
source automatically.
If you connected multiple sources at the same time, press the

"Source" button on the control panel or direct source key on the
remote control to switch between inputs.
2
Power/Standby
Lens Cap
1
English English
13 13