Advertisement
protective sheet from the pad, do not
touch the adhesive side.
Press the suction cup of the mounting
device against the pad (2B).
Turn the catch on the mounting device
to the desired position (2C). Rotate
the ring on the mounting device
clockwise (2D) to create a vacuum
between the suction cup and the pad.
To detach the suction cup from the
pad, proceed in the same way as when
you detach the cup from a windscreen
(6, 7, and 8).
Place or remove the mobile device
Do not place or remove a mobile
device while driving.
To place your device into the holder,
insert the device into the holder (see
step 3), press the back of the holder
with your thumb, and push the device
to the back (4). Slide the switch at the
Attach the holder to the
mounting device
To attach the mobile holder to the
mounting device, insert the catch on
the mounting device into the slot at
the back of the holder (2E). Rotate the
holder clockwise about 90 degrees
until it locks into place (2F). Make sure
the mounting device is firmly
attached (2G).
To detach the holder from the
mounting device, rotate it
anticlockwise.
top of the holder to the left (5). Make
sure the device is firmly locked in
place. To charge the battery of your
device, use a compatible charger.
Connect the charger plug to the
charger connector on your device.
ENGLISH
Advertisement
