Advertisement
Make sure the mounting device or
mobile holder is not installed where
you might come in contact with it in
the event of an accident or collision.
Periodically check that the suction cup
at the bottom of the mounting device
is firmly attached to the windscreen or
dashboard, especially if the ambient
temperature changes a lot.
Attach to a windscreen
Attach the holder to the
mounting device
To attach the mobile holder to the
mounting device, insert the catch on
the mounting device into the slot at
the back of the holder (see step 1A at
the start of this guide). Rotate the
holder clockwise about 90 degrees
until it locks into place (1B).
Never leave the mounting device
inside the car in direct sunlight or in
excessive heat. The mounting device
and suction cup may be damaged and
adhesion may be impaired if the inside
temperature exceeds +70°C (160°F).
When attaching a mobile holder, make
sure the display of the mobile device is
clearly visible for the user. For your
safety, install the holder in the upright
position.
To detach the holder from the
mounting device, rotate it
anticlockwise.
Attach the mounting device to
the windscreen
Before you attach the mounting
device to the windscreen, locate a safe
mounting surface on the windscreen,
ENGLISH
Advertisement
