Packet Data Access Points; Wlan Internet Access Points - Nokia N78-1 User Manual

Packet data access points

Press , and select
Connection Destinations
>
point, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with
Follow the instructions from your service provider.
Access point name
●
point name from your service provider.
User name — The user name may be needed to
●
make a data connection, and is usually provided
by the service provider.
Prompt password
●
password every time you log in to a server, or if
you do not want to save your password in the
device, select Yes.
Password — A password may be needed to
●
make a data connection and is usually provided
by the service provider.
Authentication
●
your password encrypted or
your password encrypted when possible.
Homepage — Depending on the access point
●
you are setting up, enter the web address or the
address of the multimedia messaging centre.
Select Options
>
the following settings:
160
Tools Settings
> >
New access
>
, and select Edit.
— You obtain the access
— If you must enter the
— Select Secure to always send
Normal to send
Advanced settings to change
Network type — Select the internet protocol
●
type to transfer data to and from your device. The
other settings depend on the selected network
type.
Phone IP address (for IPV4 only) — Enter the IP
●
address of your device.
DNS addresses — Enter the IP addresses of the
●
primary and secondary DNS servers, if required
by your service provider. Contact your internet
service provider to obtain these addresses.
Proxy server address
●
the proxy server.
Proxy port number
●
of the proxy server.

WLAN internet access points

Press , and select Tools
Connection Destinations
>
point, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with
Follow the instructions from your WLAN service
provider.
WLAN network name
●
manually or Search for
an existing network, WLAN network mode
WLAN security mode
settings of its access point device.
— Enter the address of
— Enter the port number
Settings
> >
New access
>
, and select Edit.
— Select Enter
networks. If you select
and
are determined by the