Table of Contents
Advertisement
of your device, enter *#2820# in the standby
mode.
Pair devices
To pair with compatible devices and view your
paired devices, in the main view of Bluetooth
connectivity, scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other
device to use the same code. Devices that do not
have a user interface have a factory-set passcode.
The passcode is used only once.
1.
To pair with a device, select
paired
device. Devices that are within range are
displayed.
2.
Select the device, and enter the passcode. The
same passcode must be entered on the other
device as well.
3.
Some audio enhancements connect
automatically to your device after pairing.
Otherwise, scroll to the enhancement, and select
Options
Connect to audio
>
Paired devices are indicated by
search.
To set a device as authorised or unauthorised, scroll
to the device, and select from the following options:
●
●
To cancel a pairing, scroll to the device, and select
Options
Options
New
>
If you want to cancel all pairings, select
Delete
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if
you want to accept the message. If you accept,
device.
Inbox
in the device
through Bluetooth connectivity are indicated by
Set as authorised
— Connections between your
device and the authorised device can be made
without your knowledge. No separate
acceptance or authorisation is needed. Use this
status for your own devices, such as your
compatible headset or PC or devices that belong
to someone you trust.
devices in the paired devices view.
Set as unauthorised
— Connection requests
from this device must be accepted separately
every time.
> Delete.
all.
is displayed, and the item is placed in the
folder in Messaging. Messages received
.
indicates authorised
Options
>
105
Advertisement
Table of Contents
