Table of Contents
Advertisement
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with
.
Network mode
(shown only if supported by the
operator)—Select which network to use. If you select
mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator
selection—Select
search for and select one of the available networks,
or
Manual
to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is,
the operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Dual
Automatic
to set the device to
Copyright © 2006 Nokia. All rights reserved.
Cell info
display—Select
On
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhanc. sett.
Indicator shown in the standby mode:
—A headset is connected.
Select
Headset
or
Bluetooth handsfree
options are available:
Default
profile—To set the profile that you want activated
each time you connect a certain enhancement to your
device. See
"Profiles—Set
tones", p. 22.
Automatic
answer—To set the device to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to
Beep once
or Silent, automatic answer is
disabled.
to set the device to indicate
and the following
109
Advertisement
Table of Contents
