Table of Contents
Advertisement
SIP settings
SIP (Session Initiation Protocol) settings are needed for
certain network services using SIP, such as video sharing.
You may receive the settings in a special text message
from your network operator or service provider. You can
view, delete, or create these setting profiles in
settings.
Data call
The data call settings affect all access points that use a
GSM data call.
Online
time—Set data calls to disconnect automatically
after a time-out if there is no activity. To enter a time-out,
select
User
defined, and enter the time in minutes. If you
select Unlimited, data calls are not disconnected
automatically.
Wireless LAN
Follow the instructions from your service provider.
WLAN netw.
name—Select
netw.. If you select an existing network,
mode
and
WLAN security mode
settings of its access point device.
WLAN netw.
mode—Select
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
SIP
Enter manually
or
Search for
WLAN netw.
are determined by the
Ad-hoc
to create an ad-hoc
Copyright © 2006 Nokia. All rights reserved.
WLAN security
mode—Select the encryption used: WEP,
802.1x
(not for ad hoc networks), or WPA/WPA2. If you
select
Open
network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the network
supports them.
WLAN security
sett.—Enter the settings for the selected
security mode:
Security settings for WEP:
WEP key in
use—Select the WEP key number. You can
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
Authentication
type—Select
authentication type between your device and the wireless
LAN access point device.
WEP key
settings—Enter
WEP encryption
key),
WEP key format (ASCII
key
(the WEP key data in the selected format).
Security settings for
802.1x
WPA
mode—Select the means of authentication:
use an extensible authentication protocol (EAP) plug-in, or
Pre-shared key
to use a password. Complete the
appropriate settings:
EAP plug-in settings
(only for EAP)—Enter the settings as
your service provider instructs.
Open
or
Shared
for the
(length of the
or Hexadecimal), and
WEP
and WPA/WPA2:
EAP
to
103
Advertisement
Table of Contents
