Table of Contents
Advertisement
Pre-shared key
password. The same password must be entered on the
wireless LAN access point device.
TKIP
encryption—Select whether Temporal Key Integrity
Protocol (TKIP) is used.
Homepage—Define a home page.
Select
Options
>
following:
IPv4
settings:
Phone IP address
device),
Subnet mask
gateway
(the gateway), and
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
IPv6 settings
>
known, or
User
defined.
Ad-hoc channel
number (1-11) manually, select
Proxy serv.
address—Enter the address for the proxy
server.
Proxy port
number—Enter the proxy port number.
104
(only for
Pre-shared
key)—Enter a
Advanced settings
and from the
(the IP address of your
(the subnet IP address),
DNS
address—Enter the IP
DNS
address—Select Automatic,
(only for Ad-hoc)—To enter a channel
User
defined.
Copyright © 2006 Nokia. All rights reserved.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data
are in a network that supports packet data, the device
registers to the packet data network. Also, starting an
active packet data connection is quicker (for example,
to send and receive e-mail). If you select
the device uses a packet data connection only if you start
an application or action that needs it. If there is no packet
Default
data coverage and you select
periodically tries to establish a packet data connection.
Access
point—The access point name is needed to use your
device as a packet data modem to your PC.
Well-
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card.
You can save these settings to your device, view, or delete
them in Configurations.
conn.—If you select
When available
When
available, the device
and you
When
needed,
Advertisement
Table of Contents
