Using Basic Functions; Sering Up The Tv Automatically - Sony FD Trinitron WEGA KV-32FS200 Operating Instructions Manual

Using Basic Functions
Setting Up the TV Automatically
After you have finished connecting your TV, you can perform Auto Program to set up your channels.
When Auto Programming, the TV will automatically search for available channels and program
receivable channels.
mw__R
1
Press ,@, to turn on the TV. The Initial Setup screen appears.
CH CH
2 Press (_) on the remote control or on the TV front panel to perform Auto Program, or press (_)
to exit.
To perform Auto Program again
1
Press MENU
CD"
2 Press _ to highlight Channel Setup Menu.
3 Press _" to highlight Cable. Press CE3 to select.
4 Press '_ or `5 to select On or OFF according to how you connected your TV. Press CE3.
5 Press ,5 to highlight Auto Program. Press CE3 to search for channels.
6 After performing Auto Program. press _u to exit.
To reset the TV to factory settings
1 Turn the TV on.
RESET 2
Hold dov, n c::3 on the remote control.
3 Press and release tile POWER button on the TV front panel. (Tile TV will turn itself off,
then hack on.)
4
Release _:_'.
17