Using Picture In Picture (Pip) - Sony FD Trinitron WEGA KV-32FS200 Operating Instructions Manual

Operating Instructions
Using Picture in Picture (PIP)
The Picture-in-Picture (PIP) feature allows you to view two programs simultaneously, one in the full
size "'main" picture and one in a small "'window" picture.
The PP features Only for the models • ........
KV-27Fs200_ KM-32Fs200 and KV-36FS200; i_: i ;:_'i_ ¢_;';
Displaying Picture in Picture
Indicates which
picture is currently
recewmg
number of
Main the main picture
of the window
picture
picture
To use PIP
1
Press the TV button in the FUNCTION bar to control PIP with the yellow-labeled buttons. Tune
your TV to a channel, which you know is currently airing programming.
PiP
2 Press the (_ button to display the window picture.
3 Use the PIP (yellow) CH +/- buttons to change the channel in the PIP window picture.
To check your PIP
1
Press the TV button in the FUNCTION bar to control PIP with the yellow-labeled buttons. Tune
your TV to a channel, which xou know is currently airing programming.
mr, _WAP
2 Press the _ to turn PIP on. Press (_, the channel fi'om the main window should now appear in
the window picture.
:3 Select the same channel in the main picture (use the CH +/- buttons on the bottom of your remote
control). You should now have the same program playing in both windows.
4 Use the PIP (yellow) CH +/- buttons to change the channel in the PIP window picture.
I_/NJDEO
5 Press the (_) PIP (yellow) button to sv¢itch the PIP window to other video inputs for other
equipment that is connected to an'.' t_f the VIDEO IN jacks of your TV. You should see a different
picture in your PIP window for each piece of connected video equipment. Make sure the connected
equipment is turned on and working ".,,hen you perform this test.
6 If the PIP feature does not work properly with the TV or the connected video equipment, refer to
the troubleshooting section beginning on page 42.
_fyou're having problems with PIP,refer to "Setups that affect your ability to use PIP" (page 22) or
see Troubleshooting section (page 42) for possible solutions.
20