Sony FD Trinitron WEGA KV-32FS200 Operating Instructions Manual page 9

Operating Instructions
Button
POWER buttons
1_ FUNCTION buttons
PIP (Picture in
Picture)
VCR (operating)
REC
II
[] TV/VIDEO
[] DISPLAY
[] MTS/SAP
[] ®-® ..d
ENTER
[] GUIDE
MENU
2_ CH (channel)
Description
Press to tttm on and offthe TV and other audio/video
equipment you have programmed into the remote
control For mslructions, see "_Programming the Remole
Control" on page 39
Press to select the equipment (TV. VCR/DVD. SAT/
CABLE) that you want to operate with the remote
control The thdicator (LED) lights up momentanly
wizen pushed to show which device the remote control is
operating
Operates PIP feature. See -Using Picture m Picture
(PIP)" on pag_ 20
Operates your VCR. The VCR must be programmed into
the remote control For instructions, see "Programming
the Remote Control" on page 39
Press ® bu,0.and the_ bu.o. - above i e_-= the
same time to record any programs with your VCR (the
remote control must be programmed i_ order to use
REC).
Rewind.
Vast- forwardl
Play•
Stop
Pause Press again to resume normal playback
Press to cycle through available video inputs
Press once to display the current time and program status
(such as channel number, channel label (if set), video
input, and video label) Press agath to trtm display off
Press to cycle through the Multi-channel TV Sound
(MRS) options: Stereo, Auto SAP (Second Audio
Programrnmg), and Mono
Press to change chan_els directly The channel changes
after 2 seconds
Press to display the program guide of your satellite
antra
Press the arrow buttons to move the cursor in the
on-screen menus Press the center button to select or
access an optloll
Press to display the on-screen menu Press again to exit
the menu at any time
Press to change chamlels
Io scan rzpidl3_ throug.h the
charmels, press and hold down the CH - or CH- button
For infor?nation on'Picturein Picture (PIP)operation buttons,:see page 21.
_-_ If you lose your remote control, see page 44.
4