Connecting Your "Iv; Tv Rear Panel - Sony FD Trinitron WEGA KV-32FS200 Operating Instructions Manual

Connecting Your TV
Read this section belbre setting up your TV for the first time. This section covers basic connections in
addition to any optional equipment you may be connecting.
The'IV rear panels illustratedin this manual are for KV-27FS200, KV-32FS200 and
K'C-27FS 100_ KV-32FS100_and1¢_-36E5100;: d o not I-kwe _he AUX lnp_ and TO CO_!_R_ o,jtpl_t jacJ;; , _
TV Rear Panel
Jack
%AUX
[_TO CONVERTER
_VH_UHF
S VIDEO
VIDEO IN
AU _
/ /......
15 6i
Description
This input allows you to view local and cable channels if your cable
provider does not leature local channels. You can switch between local
and cable channels easily by pressing ANT on the remote control.
Devices connected to the AUX input cannot be viewed in PIP.
This is a VHF/UHF out jack that lets you set up your TV to switch
between scrambled channels (through a cable box) and normal cable
channels (CATV). Use this jack instead of a splitter to get better
picture quality when you need to switch between scrambled and
unscrambled cable channels.
This input connects to your VHF/UItF antenna or cable.
This input connects to the S VIDEO OUT jack on your VCR or other
video equipment that has S VII)EO. S VIDEO provides better picture
quality than the VI-IF/UHF jacks or the video input jack. S VIDEO
does not provide sound: you still must connect the audio cables.