Using Picture In Picture (Pip) With Remote Y181 - Sony WEGA KV 27FV300 Operating Instructions Manual

Operating Instructions

Using Picture in Picture (PIP) with Remote Y181

The Picture-in-Picture (PIP) feature allows you to view two programs simultaneously, one in
the full size "main" picture and one in a small "window" picture.
Displaying Picture in Picture
Indicates which
picture is currently
receiving sound
Main
picture
To use PIP
1
Press the TV button in the FUNCTION bar to control PIP with the yellow-labeled buttons.
Tune your TV to a channel which you know is currently airing programming.
2
Press the button to display the window picture.
3
Use the PIP (yellow) CH +/- buttons to change the channel in the PIP window picture.
To check your PIP
1
Press the TV button in the FUNCTION bar to control PIP with the yellow-labeled buttons.
Tune your TV to a channel which you know is currently airing programming.
2
Press the to turn PIP on. Press
appear in the window picture.
3
Select the same channel in the main picture (use the CH+/- buttons on the bottom of your
remote control). You should now have the same program playing in both windows.
4
Use the PIP (yellow) CH+/- buttons to change the channel in the PIP window picture.
5
Press the PIP (yellow) button to switch the PIP window to other video inputs for other
equipment that is connected to any of the VIDEO IN jacks of your TV. You should see a
different picture in your PIP window for each piece of connected video equipment. Make
sure the connected equipment is turned on and working when you perform this test.
6
If the PIP feature does not work properly with the TV or the connected video equipment,
refer to the troubleshooting section beginning on page 52.
If you're having problems with PIP, refer to "Setups that Affect Your Ability to Use PIP" (page 28) or
see Troubleshooting section (page 52) for possible solutions.
24
Channel number of
9 6
the main picture
Channel number
2
of the window
picture
Window
picture
, the channel from the main window should now