Programming The Remote Control - Sony KV-36FS320 Operating Instructions Manual

Remote Control
Problem Possible Remedies
I cannot operate the rj
Press TV (FUNCTION) when operating your TV.
remote control rj Check the orientation of the batteries.
Batteries could be weak. Replace them (page 2).
Move the TV three to four feet away from fluorescent lights.
I cannot change vj Make sure you have not inadvertently switched your TV from
channels with the the channel 3 or 4 setting if you are using another device to
remote control
change channels.
If you are using another device to control channels, be sure that
you have pressed the FUNCTION button for that device. For
example, if you are using your VCR to control channels, be sure
to press the VCR/DVD FUNCTION button (page 4).
I lost the remote rj You can use the front panel controls to access your menus,
control change channels, adjust the volume, or change video inputs
(page 2). Contact your nearest Sony Dealer to order a
replacement. To find out the nearest dealer please call our Sony
Direct Accessory and Part Center at 1-800-488-7669 (U.S.
residents only).
Programming The Remote Control
Problem Possible Remedies
More than one code rj Try entering them one by one until you come to the correct code
is listed for your
component.
I entered the wrong vj If you enter a new code number, the code number you
code number previously entered at that setting is erased. To reenter the
correct code number you must reprogram the remote control
(page 5).
I cannot operate a _ Use the component's own remote control.
component with the
remote control
When I changed the _ Reprogram the remote control (page 5).
batteries, the code
numbers changed
back to the factory
settings
52