Sony KV-36FS320 Operating Instructions Manual page 24

Connecting a DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R)
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player
to AUDIO/VIDEO IN on your TV.
Rear of DVD Player TV
Optional connection
.................. Audio R (red)
Audio L (white)
...................... Video (yellow)
Optional connection
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
Connecting a DVD Player using Component Video (Y, PB, PR/R, L)
If your DVD player is equipped with component video outputs (Y, PB, Pit), you can improve
the picture quality by using component video cables (480i only).
Rear of DVD Player I _ Rear°fTV _ I_l 1 .......
-% Using component ; ideo cables (not Make sure your DVD player is set up (see page • 1). •
supplied), connect Y, PB, PR OUT on your DVD player to Y, PB,PR IN on your TV.
Connect AUDIO OUT on your DVD player to AUDIO IN on your TV.
1
2
Using your TV with this connection
Program your Sony remote control to operate your DVD (see page •5).
VCR'DVD
To activate your remote, press CED (FUNCTION button) to operate your DVD.
Press _ repeatedly to switch to the DVD player's input (VIDEO input).
18