Sony KV-36FS320 Operating Instructions Manual page 23
Hide thumbs
Also See for KV-36FS320:
- Specifications (2 pages) ,
- Dimensions (1 page) ,
- Service manual (164 pages)
Table of Contents
Advertisement
Connecting a TV, VCR, and Satellite
Receiver using Component Video
(Y, PB,PR)
From
cable/
antenna
Rear of TV
Connect the coaxial cable from your satellite antenna
to SATELLITE IN on the satellite
receiver.
1
2
Connect the coaxial cable from your cable service or antenna
to the IN jack on your VCR.
3
Using a coaxial cables (not supplied),
connect the OUT jack on your VCR to the
VHF/UHF
jack on your TV.
4
Using audio/video
cables (not supplied),
connect AUDIO/VIDEO
OUT on your satellite
receiver to AUDIO/VIDEO
IN on your VCR.
5
Using audio/video
cables (not supplied),
connect AUDIO/VIDEO
OUT on your VCR to
AUDIO/VIDEO
IN on your TV.
6
Using component
video cables (not supplied),
connect Y, P,, PR OUT oil your satellite
receiver to Y, P_, PR IN on your TV.
J
Connect AUDIO OUT on your satellite receiver to AUDIO IN on your TV.
Using your TVwith this connection
Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
Turn on your VCR to enable your satellite receiver to work with this connection.
VCR/DVD
To activate your remote, press
CED (FUNCTION
button) to operate your VCR or 8CED
(FUNCTION
button) to operate your satellite receiver.
Press _
repeatedly
to switch between
VCR input (VIDEO input), VHF/UHF
(local channels
or unscrambled),
or your cable box (cable system or scrambled
channels).
17
Advertisement
Table of Contents
