Sony KV-36FS320 Operating Instructions Manual page 22

Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver
using Composite Video (VIDEO/AUDIO L(MONO), R)
From •
cab e or III 2 Optional
Satellite antenna antenna _ _ Rear of TV
ca b le i_==1
.0YSatellite receiver /l" ..... _ ........
A
_ _ Video (yellow)
.................. Audio L (white)
......................... Audio R (red)
VCR
5 For Playback
6 For Viewing
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2 Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna
(optional connection to view local channels or broadcast).
3 Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your satellite receiver
b) the VHF/UHF jack on the TV
4 Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the
VHF/UHF IN on your VCR.
5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
6 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
VCR'DVD
To activate your remote, press CED (FUNCTION button) to operate your VCR or _CA_LECED
(FUNCTION button) to operate your satellite receiver.
Press _ repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
16