Programming The Remote Control - Sony FD Trinitron WEGA KV-20FA210 Operating Instructions Manual
Hide thumbs
Also See for FD Trinitron WEGA KV-20FA210:
- Operating instructions manual (56 pages) ,
- Supplementary manual (1 page) ,
- Service manual (126 pages)
Table of Contents
Advertisement
Using the Remote Control
Programming
the Remote Control
In order to use your remote control with other equipment,
you need to program
your remote
control.
Use the following
procedure
to program
the remote control.
1
Check the list of "Manufacturer's
Codes" on page 6 and find the three-digit
code number
for the manufacturer
of your component.
If more than one code number
is listed, use the
number
listed first.
_r
Press CZg.
3
Press _
or "(_
button
to indicate
the type of component
you want to program
with
the remote control.
4
6
Use the (_)-(_) buttons
to enter the three-digit
manufacturer's
code number.
_r_R
Press
O"
To check if the code number
works, aim the TV's remote control at the component
and
press on the green POWER button (VCR/DVD,
SAT/CABLE,
TV) that corresponds
with
that component.
If it responds,
you are done. If not try using another
code listed for that
manufacturer.
Advertisement
Table of Contents
