Sony KV-36FS320 Operating Instructions Manual page 55

I s matioH
If you have a problem with your TV, try the suggestions below. If the problem persists, see
"Contacting Sony" at the end of this section.
General
Problem Possible Remedies
I want to reset the TV _ Turn on the TV. While holding down the RESET button on the
to the factory remote control, press the POWER button on the TV front panel.
settings The TV will turn itself off, then back on again. Release the
RESET button.
The TV is dirty rj Clean the TV with a soft dry cloth. Never use strong solvents
such as thinner or benzine, which might damage the finish of
the cabinet.
I lost the parental vj In the password screen, enter the following master password:
control password 4357. After using the master password, you must create a new
password. You cannot use the master to unlock currently
blocked channels.
There is a black box _ You have selected a text option in the Setup menu (page 50) and
on the screen no text is available. To turn off this feature, select Off in the
Caption Vision option. If you were trying to select closed
captioning, select CC1-4 instead of Text1-4.
There was a blackout _ Press the POWER button on your remote control or on the TV
or power outage, and
front panel.
now the TV won't turn
on and the timer LED
is flashing
The digital cable box rj If you are connecting a VCR and digital cable box using a
does not work splitter, as described in page 13, you must use a special bi-
directional splitter (5-900 Mhz mininum) that is designed to
work with your digital cable box.
I can't connect the vj You must set up your DVD player before you can connect it
DVD player using
using component video outputs (Y, PB, PR). Disconnect the DVD
component video
player and set it up, referring to the DVD manual for
outputs (Y, PB, PR) instructions. Then, connect it to the TV again following the
instructions in "Connecting a DVD Player using Component
Video" on page 18.
51