Programming The Remote Control - Sony FD Trinitron Wega KV-27FV310 Operating Instructions Manual
Hide thumbs
Also See for FD Trinitron Wega KV-27FV310:
- Service manual (268 pages) ,
- Operating instructions manual (68 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
Using the Remote Control
Programming
the Remote Control
In order
to use your remote
control
with
other
equipment,
you need
to program
your remote
control.
Use the following
procedure
to program
the remote
control.
1
Check the list of "Manufacturer's
Codes" on page 6 and find the three-digit
code number
for the manufacturer of your component.
If more than one code number is listed, use the
number listed first.
2
Press CZD-
3
Press _
oronthe
_(_
buttonbar
to indicate the type of component
you want to
program with the remote control.
4
Use the (_)-(_) buttons to enter the three-digit manufacturer's
code number.
5
Press O"
6
To check if the code number
works, aim the TV's remote control at the component
and
press on the green POWER button
that corresponds
with that component.
If it responds,
you are done. If not try using another
code listed for that manufacturer.
5
Advertisement
Table of Contents
