Programming
the Remote Control
The remote control can be programmed
to operate
other equipment
and is pre-programmed
to
operate
the following
Sony equipment.
DVD
DVD Player
31033
AMP
Receiver
52172
STB
Digital Satellite
01639
Programming Other Equipment
-2
Follow the steps below to program
your TV remote
control.
1
Find the code that corresponds
to your equipment
from page 25. If more
than one code is provided,
try programming
the first code listed.
2
Press and hold DVD, AMP or STB simultaneously
with the INPUT button
and release.
When in the programming
mode, the FUNCTION
button blinks
for approximately
30 seconds
until a code is entered.
3
Enter the five digit code using 0-9 while the FUNCTION
button is lit. If the
code is not entered
within 30 seconds,
you must repeat step 2.
4
Press (_
or ENT to confirm
the code. If successfully
programmed,
the
FUNCTION
button blinks twice; if not, it blinks five times.
Any of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling.
For example, DVD can be programmed to operate a Blu-ray Disc player.
Confirm
the Programming
If you can turn your equipment on and oft"using the green POWER button, the programming is
complete.
If not, try the next code listed.
• In some cases, you may not be able to program your remote control. If this is the case, use your equipment's
own remote control.
24