Sony FD Trinitron Wega KV-27FV310 Operating Instructions Manual page 23
Hide thumbs
Also See for FD Trinitron Wega KV-27FV310:
- Service manual (268 pages) ,
- Operating instructions manual (68 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
Operating instructions
Connecting a TV, VCR, and Satellite
Receiver
4
From
1
_
_
cable/
antenna
2
VCR
@@@
Satellite receiver
1
31
_Rear
of TV
1
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
2
Connect the coaxial cable from your cable service or antenna
to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF
jack on your TV.
4
Using audio/video
cables (not supplied),
connect AUDIO/VIDEO
OUT on your satellite
receiver to AUDIO/VIDEO
IN on your VCR.
5
Using audio/video
cables (not supplied), connect AUDIO/VIDEO
OUT on your VCR to
AUDIO/VIDEO
IN on your TV.
Using your TVwith this connection
This connection
allows
you to do the following:
O
Program your Sony remote control to operate your VCR or satellite receiver (see pages 7-8).
O
Turn on your VCR to enable your satellite receiver to work with this connection.
_T_
.
O
To activate your remote, press C_ to operate your VCR or C_
to operate your satellite
receiver.
O
Press _
repeatedly
to switch between
VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled),
or your cable box (cable system or scrambled
channels).
18
Advertisement
Table of Contents
