General Operation - Axxera AXD430 Installation & Owner's Manual

Faceplate Removal
Power On/Off
Source
Auxiliary Input
Volume
Display
Reset
Set the Clock
12/24-hour Clock
AXD430

General Operation

Press OPEN to open the face plate, then pull away from
the right side to remove. To re-install, insert right side of
faceplate first then push left side to secure.
Press or any other button to turn the unit on. Press
turn the unit off.
Press SOURCE to enter the Source Menu, then press
SOURCE or rotate the volume knob to select between
Tuner, Disc, Aux Front, Aux Rear, USB, iPod and Pandora
modes. Modes of operation are shown in the display.
The AXD430 offers both front and rear auxiliary input ports
for connecting an audio device, MP3 player, etc. Press
SOURCE to select either the front or rear auxiliary input
mode.
Adjust volume using volume knob (00-46).
Press DISP to toggle between ID3 tag and file/folder name
for MP3/WMA files being played from CDs or USB devices.
Press RESET upon initial installation or if abnormal operation
occurs. Reset button is located behind the front panel.
The unit will display the time on the LCD display. Clock
settings are adjusted in the General setup menu (refer to
page 8).
The clock will display 12-hour AM/PM time or 24-hour time
(22:00). Frequency spacing is adjusted in the General setup
menu (refer to page 8).
6
to