[Rotate Disp.] - Panasonic LUMIX DMC-FZ38 Operating Instructions Manual

This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] Mode menu.
Press 4 to select [ON] and then press [MENU/SET].
•
The pictures are displayed without being rotated when you select
[OFF].
•
Refer to P55
Press [MENU/SET] to close the menu.
Note
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
The display is not rotated during multi playback
•
Pictures recorded with the camera upside down will not be displayed rotated.
Advanced (Playback)

[ROTATE DISP.]

for information about how to play back pictures.
(P56) or [CALENDAR] (P157).
- 165 -
(P27)