How To Use - Panasonic MC-E7001 Operating Instructions Manual

How to Use

Connecting the flexible hose
Push the end of the head (1) on the flexible
hose into the attachment point (2) on the
vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press on the button (3) situated on
the head, then pull upwards.
Assembling the tubes
(depending on model)
• Metal or plastic tube (6)
- Fit together the two tubes by twisting slightly.
Using the cleaning head and Accessory
Nozzles
Fit the large cleaning head onto the
end of the tube.
• The 2 position head is equipped with a
pedal (7) which allows you to alter its position
according to the type of floor to be cleaned.
Hard floor position (tiles, parquet floors...)
Press on the pedal to lower the brush.
Carpet or rug position. Press on the pedal
to lift the brush up.
• Crevice Tool (8)
For vacuuming in those normally inaccessible
places like a window frame or a crevice in the
wall.
• Dusting brush (9)
For vacuuming picture frames, furniture
outlines, books and other uneven objects.
How to plug in and use
Pull out the mains lead to the desired length
and plug into the socket.
Press the button (10) to start the vacuum
cleaner.
To stop it press the button (10) again.
Press the button (11) to rewind the power
cord.
Adjusting the power level
• If your appliance is equipped with an
electronic variable rotary button (12), you can
choose the power appropriated for the task.
The more you rotate the rotary button (12)
towards the right, the greater the suction
power.
• The flexible hose handle has a manual air
flow regulator (13) which allows you to briefly
reduce the suction level.
Park-System (14)
For short breaks during vacuuming, for
example to move a small piece of furniture or
a rug, use the [Park system] to support the
flexible hose and cleaning head.
• Slide the hook attached to the large cleaning
tool into the slot on the rear of the appliance.
Carrying and storage (15)
When you have switched off and unplugged
the appliance, press the button (11) to
automatically rewind the cord.
You can move or store your appliance in a
vertical position by sliding the hook on the
large cleaning head into the clip on the
underside of the appliance.
– 5 –