Inserting The Card - Panasonic LUMIX DMC-FZ2B Operating Instructions Manual

Digital camera model no.dmc-fz2b
Hide thumbs Also See for LUMIX DMC-FZ2B:
Table of Contents

Advertisement

Inserting the Card

Preparation
[Preparation]
• Check that the camera switch is set to [OFF]
and the lens is fully retracted.
3
• Close the flash. (P39)
1
2
2
3
[Removing the card]
1
4
2
3
4
• If the Memory Card door cannot be
completely closed, take the card out and
insert it again.
2
• If the card cannot be fully inserted, verify
whether the direction of the card is correct.
• We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
• If the card is not fully inserted, the card may
be damaged.
Slide the lever in the direction of the
arrow to open the Memory Card/
battery door.
Insert the card with the label facing
the front of the camera.
• Insert the card, pressing gently until it
locks in place. If the card will not insert
freely, it may be reversed. Do not force
the card.
• Do not touch the connection terminals
on the back side of the card.
Close the Memory Card/battery door.
Open the Memory Card/battery door.
Press the card to release.
Pull the card out.
Close the Memory Card/battery door.
17

Advertisement

Table of Contents
loading

Table of Contents