Using the AC Adapter
1
2
3
Preparation
You can connect the camera via the DC cable
to the AC adapter, without any concerns of
battery discharge.
[Preparation]
• Check that the camera switch is set to [OFF]
and the lens is fully retracted.
1
Connect the AC mains lead.
2
Open the DC IN terminal door.
3
Connect the DC cable (supplied) to
the camera.
• During normal use the camera becomes
warm, this is not a fault.
• When not in use always disconnect the AC
adapter and DC cable.
• The battery cannot be charged in the
camera with the AC adapter connected.
• Use the supplied DC cable.
16