Charging The Battery - Panasonic LUMIX DMC-FZ2B Operating Instructions Manual

Charging the Battery

1
2
4
Preparation
1
Connect the AC mains lead.
• Push the AC plug as far in to the AC in
terminal as it can go. A gap will remain
as shown below.
• The [POWER] indicator A lights up.
2
Attach the battery to the AC adapter.
(1 # 2)
• The [CHARGE] indicator B lights up
and charging starts.
3
When the [CHARGE] indicator B
turns off, charging is finished.
• Charging takes about 90 minutes.
4
Remove the battery from the AC
adapter.
• The battery cannot be charged when the
DC cable is connected to the AC adapter.
• After use, be sure to disconnect the AC
mains lead.
• During normal use or charging, the camera/
battery becomes warm. This is normal and
is not a fault with the camera/battery.
• The battery/AC adapter supplied with this
camera is exclusively designed for this
camera. Do not use with any other
equipment.
13